Portable solar in a small package
The Anker SOLIX PS100 is the most compact panel of its series: once folded, it fits in a car boot, under a van seat or in a carry bag without taking up much room. Unfolded, it offers enough surface to feed a small power station or a battery during an outdoor stop, with a rated power of 100 W.
A front side and a rear side
The term bifacial means the module can collect light on both faces. Positioned above a bright surface, it may therefore pick up some of the reflected light. The real contribution naturally depends on the ground, the angle and the sunshine; no figure is stated here.
Uses for private users and professionals
- Weekend in a tent or motorhome: topping up a power station for lighting, a phone or a small fridge.
- Fishing, multi-day hikes, photography bivouacs.
- For a tradesperson or technician on the move: powering a tool or a measuring device on a site without a socket.
Construction
The cells use N-type technology. The IP68 rating indicates dust and water resistance suited to outdoor use. Folded, the panel measures 510 x 600 x 64 mm; unfolded, 1030 x 600 x 17 mm. It weighs 2.8 kg.
Getting started
- Unfold the panel on stable ground, in the sun and clear of obstacles.
- Tilt it toward the sun and secure it so the wind cannot carry it off.
- Connect the MC4 output to your power station with the appropriate cable.
- Check on the station’s screen that charging has started.
Compatibility with your device depends on its input voltage range: compare it with the electrical values below and with the manufacturer’s manual.
What the figures tell you
- An open-circuit voltage of 25.9 V, lower than that of large modules: it suits low-voltage power station inputs, subject to checking.
- A current of 4.63 A at maximum power, which the cable must carry without overheating.
- A weight of 2.8 kg, so it can be carried by hand without undue effort.
To gain power later, some users combine several panels; this changes the overall voltage and current, so read the power station manual before any coupling.
Technical specifications
- Brand: Anker
- Power: 100 W
- Cell type: N-type
- Open-circuit voltage (Voc): 25.9 V
- Voltage at maximum power (Vmp): 21.6 V
- Current at maximum power (Imp): 4.63 A
- Short-circuit current (Isc): 4.86 A
- Output: MC4
- Weather protection: IP68
- Folded dimensions: 510 x 600 x 64 mm
- Unfolded dimensions: 1030 x 600 x 17 mm
- Weight: 2.8 kg
Safety and keeping
Do not walk on the panel or lay it on sharp edges. Make MC4 connections only with clean, dry connectors that are fully clicked in. Clean the surface with clear water and a soft cloth, without abrasives. Before folding it, dry it, then store it flat or in its cover, away from excessive heat.
