EN
0 Call us+32 462 37 47 34

Electrical control

Electrical control brings together 22 products that measure, distribute and command the energy in your setup: smart meters, connected plugs, DC distribution hubs, protection parts and remotes from Bluetti, Anker, Ecoflow, Zendure, Xtorm, SUNBEAMsystem and Jackery.

Showing 1–12 of 22 results

Products

Anker

Anker SOLIX P1 energy meter, lightweight 60 g unit

  • Meter from the Anker SOLIX range designed to measure the energy flows of an installation.
  • Weighs just 60 g, so it is easy to fit in a panel or enclosure.
  • To be paired with a compatible system, to be confirmed in the manufacturer's manual.
€ 22.46incl. VAT
Add to cart

Anker

Anker SOLIX Smart Plug Gen 2, 16 A Rated Current, IP 20

  • Second-generation Anker SOLIX smart plug, fitted between a wall socket and an appliance.
  • Rated current of 16 A, to compare with the consumption of the connected device.
  • IP 20 rating: indoor use only, away from water and splashes.
  • Measures 50 × 50 × 83 mm and weighs 90 g, discreet on a wall or a power strip.
€ 32.40incl. VAT
Add to cart

Anker

Anker SOLIX Solarbank E1600 Output Switch, 1000 x 90 x 45 mm

  • Output switch designed to accompany the Anker SOLIX Solarbank E1600.
  • Elongated format of 1000 × 90 × 45 mm, to keep in mind when choosing where it goes.
  • Weighs 400 g, so it adds little load to its support or fixing.
  • Have a qualified installer handle the wiring whenever the household network is involved.
€ 35.10incl. VAT
Add to cart

Bluetti

Bluetti DC Hub for Charger 2, DC Distribution Hub

  • Bluetti DC hub designed to accompany the brand's Charger 2.
  • Brings direct-current distribution together in one place in the installation.
  • Useful in a converted vehicle, boat or mobile workshop fitted with Bluetti equipment.
  • Electrical values and compatibility should be checked in the manufacturer's manual.
€ 224.10incl. VAT
Add to cart

Bluetti

Bluetti Hub A1 Parallel Box for Combining Power Units, 3.5 kg

  • Parallel box from Bluetti, intended to link several elements of an energy installation.
  • Weighs 3.5 kg: easy to carry, yet steady once set down.
  • Useful for centralising the connections of a converted vehicle, a workshop or a shed.
  • Read the manual to learn which models are compatible before buying cables.
€ 494.10incl. VAT
Add to cart

Bluetti

Bluetti Hub D1 DC Power Hub, Compact 250 x 160 x 73 mm Unit

  • DC power hub for gathering several elements of a Bluetti setup in one place.
  • Housing of 250 mm × 160 mm × 73 mm, easy to fit in a cabinet or on a shelf.
  • Weighs 1.9 kg, light enough for mobile builds or converted vehicles.
  • Check compatibility in the manufacturer's manual before connecting anything.
€ 269.10incl. VAT
Add to cart

EcoFlow

EcoFlow Smart Plug for EU Sockets, 53 x 53 x 79 mm, 113 g

  • EcoFlow smart plug in its European version, for remotely controlling a connected appliance.
  • Measures 53 x 53 x 79 mm, so leave a little clearance in front of the wall socket.
  • Weighs 113 g, which a wall socket in good condition can carry.
  • Maximum current is not given here: read the manual before plugging in a heavy consumer.
€ 32.40incl. VAT
Add to cart

EcoFlow

EcoFlow Delta Pro Remote Control for Your Power Station, 280 g

  • Remote control designed for the EcoFlow Delta Pro power station.
  • Weighs 280 g, so it slips into a pocket or a vehicle storage tray.
  • Lets you monitor and operate the station without bending over the unit, as described in the manual.
  • Useful when the station is kept in a trunk, a utility room or a tight corner.
€ 98.10incl. VAT
Add to cart

EcoFlow

Ecoflow P1 Meter Module for Smart Meters, IP20 Indoor, 220 g

  • Ecoflow measuring module designed to read data from a smart electricity meter.
  • Very compact format: 43.4 x 20 x 92 mm and only 220 g.
  • IP20 protection rating: intended for indoor mounting, away from moisture.
  • A useful aid for matching output to household demand in a compatible storage system.
€ 35.96incl. VAT
Add to cart

Measure, distribute, command

A solar or standalone setup is more than panels and batteries. To work well, you need to know what the home consumes, share current between devices and be able to manage everything. The products in this category cover those three needs, from smart meters to remote controls, including connected plugs and DC hubs.

Start by identifying what is missing: reliable measurement, better distribution or remote control. Then check that each accessory is stated as compatible with your battery, power station or inverter, because most are designed for a specific brand. To size the whole setup, the simulator helps you estimate your needs before choosing accessories. Orders are paid by secure bank transfer, and the 2-year legal guarantee applies to every product, so you can compare calmly before deciding.

  • Main need: measurement, distribution or control
  • Compatibility with your existing equipment
  • Single-phase or three-phase grid, where relevant
  • Free delivery in Belgium from 150 euros
Support

Request a callback

Leave your number: an adviser will get back to you.

Your privacy choices