Overview of the AC200P L
Bluetti’s AC200P L combines 2304 Wh of LiFePO4 battery, four AC sockets able to deliver 2400 W continuously and a generous 1200 W solar input. That last figure sets it apart: it allows larger photovoltaic arrays than on many stations of similar capacity, so it can recharge in a shorter time when sunshine permits.
A range of uses
For private users
Motorhome, boat, garden cabin, family trip: the unit powers lighting, refrigeration, computers and small appliances within its power limits. At home, it covers targeted needs during a power failure.
For professionals
On a building site, a film set or an exhibition, it is a sound alternative to a hundred-metre extension lead. The 48 V DC output is meant for equipment designed for that voltage; check compatibility in its documentation before connecting it.
The outputs at a glance
- 4 x 230 V sockets (EU Schuko): 2400 W continuous, 3600 W peak (5 seconds) in total;
- 2 x 18W USB-A ports and 2 x 100W USB-C PD ports;
- 2 x 15W wireless charging pads;
- 1 x 12V/10A output and 1 x 48 V DC port.
Recharging the AC200P L
Two main routes are provided. From the mains, input power reaches 2400W at most. With panels, the accepted voltage runs from 12 V to 145 V, for 15 A at most and 1200 W maximum. A high input voltage lets you wire several panels in series, but means checking the string’s cold-weather voltage before connecting. The station is controlled over Wi-Fi and Bluetooth.
Installation and handling
At 42 × 28 × 36.5 cm and 28.8 kg, it sits on a sturdy shelf or on the floor against a wall. To move it, get help. Keep the vents clear and place the station away from any flame or heat source. Inserting it into a household circuit is a job for a qualified electrician.
Reasons to choose it
- a 2304 Wh capacity, above that of many stations of this size;
- a possible solar array of up to 1200 W;
- a 48 V DC output in addition to the 12 V, AC and USB ones.
Technical sheet
- Battery: LiFePO4, 2304 Wh
- AC output: 4 x EU Schuko, 2400 W continuous, 3600 W peak (5 s)
- USB: 2 x USB-A 18W; 2 x USB-C PD 100W; 2 x wireless charging 15W
- DC output: 1 x 12V/10A; 1 x 48 V DC port
- Input: 2400W max. via 230V; solar 1200W, 12 V-145 V, 15 A max.
- Connectivity: Wi-Fi and Bluetooth
- Dimensions: 42 × 28 × 36.5 cm
- Weight: 28.8 kg
Safety, care and storage
Handle panel strings with care, since their voltage can be high. Use only cables in good condition and rated for the current, and never exceed the stated power figures. Keep the station dry. If it is to stay idle for long, store it in a mild room with a partial charge and read the manual for battery upkeep. A dry cloth is enough for cleaning.
