The short version of the Ecoflow solar cable
This solar charging cable links a panel to an input in the XT60i format over a length of 2.5 m. It is the version to favour when the panel and the device are close to each other: on a balcony, on a vehicle roof or at the foot of a shelter. The exact connectors on each side are not detailed here; check them in the manual of your panel and your station.
Suitable projects
A home user will choose it for a small mobile setup, a well-exposed balcony or an outing of a few days where everything stays together. A professional will place it on a worksite or a small control post, when a panel sits on a support next to the power box.
Design and features
2.5 m, a controlled distance
The 2.5 m length is a compromise: enough to get around a ledge or a window frame, short enough not to leave a large excess on the ground. The data gives neither the weight, nor the conductor cross-section, nor the maximum voltage or current. Consult the manual to size the whole setup.
A precise role
Its name indicates a solar charging function. It is not meant to link two batteries or to plug a device into the mains.
Recommended installation
- Choose the panel’s location before unrolling the cable.
- Connect the station first, with the panel covered or in shade.
- Connect the panel, then aim it towards the sun.
- Hold the cable in place with ties to avoid pulling on the connectors.
For a fixed installation tied to the home network, a qualified installer must be involved.
Laying tips
On a balcony or a vehicle, run the cable along a ledge rather than across a walkway. Leave a small loop near each connector to absorb vibration and movement caused by the wind.
What it brings
- A 2.5 m length, which avoids excess cable.
- A cable from the same brand as Ecoflow power stations.
- A simple connection, with no settings.
Technical specifications
- Brand: Ecoflow
- Type: solar charging cable to XT60i connector
- Dimensions: 2.5 m
Safety
Respect the voltage and current limits stated by the panel and station manufacturers. Do not connect a damaged cable, and do not handle the connectors with wet hands. As no water protection rating is provided, shield the connections from rain and splashes.
Care and storage
Wipe the cable dry, check the sheath and contacts from time to time, then store it in a wide loop in a dry place. Avoid leaving it exposed to the sun for long periods when it is not in use.
Short or long: how to decide
Compare the real distance between the ideal panel location and the station location. If this distance is under 2.5 m, this cable suits better than a longer, bulkier model. Beyond that, it is better to choose a longer cable than to strain the connectors.
