A 5 m link for your Wave equipment
This connection cable is designed for the Wave range from Ecoflow and ends in an XT150-type connector. Its 5 m length leaves room to install two parts of the same system apart from each other, for instance inside and outside a room. The manufacturer does not list the exact devices concerned here, so consult its manual before choosing this cable.
Who may need it
A home user will think of it for a motorhome, a caravan, a garden shed or an annex, where a few metres must be crossed without improvisation. A professional can fit it into a workshop, a converted vehicle or a temporary stand, where equipment is moved regularly and a cable of known length makes preparation easier.
Construction and features
A heavy cable, a sign of a substantial conductor
At 1.75 kg for 5 m, this is no lightweight lead. The weight suggests a thick conductor, but the manufacturer does not give the cross-section, nor the maximum voltage or current, here. Do not assume these values: refer to the device manual.
Length and bulk
Plan a clear route along the full 5 m, without tight bends, and a storage spot that can support the weight of the coiled cable.
Installation and connection
- Switch the devices off before handling the cable.
- Identify the orientation and keying of the connector, and do not force it in.
- Run the cable away from walkways and sharp edges.
- Secure it with suitable ties so its weight does not pull on the connectors.
For any work on the electrical installation of a dwelling, contact a qualified installer.
Advantages of this cable
- 5 m length for plenty of placement freedom.
- Weight of 1.75 kg, indicating a solid build.
- Ecoflow brand, the same as the devices in the range concerned.
Technical specifications
- Brand: Ecoflow
- Type: connection cable with XT150 connector
- Dimensions: 5 m
- Weight: 1.75 kg
- Length: 5 meters
Before you buy or lay the cable
Write down the exact model of your device, the distance to cover and the route the cable will take. If the route crosses a wall, a partition or a vehicle passage, plan a conduit or suitable mechanical protection. If you are unsure about connector compatibility, it is better to ask for advice before plugging anything in. Taking a few minutes to check saves time and avoids damaged contacts, particularly with a heavy cable that is hard to reposition once it is fixed in place.
Safety
A cable of this weight can cause injury if it falls or if someone trips over it, so do not leave it lying across a walkway. Unroll it completely in use, respect the limits given by the manufacturer and stop using it if the sheath or contacts are damaged. No moisture protection rating is provided: keep the connectors dry.
Care and storage
Clean it with a dry cloth, inspect the sheath and contacts regularly, then store it in large loops in a dry place, away from knocks. Avoid hanging it by its connectors.
