The link between the station and the micro-inverter
In an EcoFlow PowerStream set-up, the micro-inverter converts direct current into alternating current, while the portable power station acts as the energy reservoir. This cable provides the link between the two. It is 0.4 m long: a proximity lead, intended for units sitting against each other or one above the other, not for placing them apart.
The manufacturer data we hold does not list the compatible stations or the permissible electrical values. Refer to the EcoFlow manual before connecting anything.
Who may need it
Households
A home that pairs a portable station with a micro-inverter, for example to supply household devices from a battery, finds in it the connection between those elements. The short length suits a compact arrangement in a utility cupboard or on a shelf.
Professionals
An installer or technician may carry it as a spare on a job: a damaged or lost link cable holds up the whole assembly. Its small size also makes it easy to stow in a service case.
Construction: the information supplied
The data is limited to the brand and the 0.4 m length. It does not state the conductor cross-section, the maximum current or the connector type at each end. Do not assume them: check the connectors on your units before choosing this cable.
Fitting and connection
- Switch off the station and the micro-inverter before plugging or unplugging.
- Position the two units so the cable is neither stretched nor bent sharply.
- Push the connectors in fully, without force.
- Check that nothing pulls on the sockets.
Any connection of the micro-inverter to the domestic network is a job for a qualified installer.
Strengths
- Very short format, suited to compact installations.
- Designed by the manufacturer for the PowerStream range.
- Easy to carry as a spare part.
Technical specifications
- Brand: EcoFlow
- Type: micro-inverter to power station link cable
- Length: 0.4 m
Before first use
Look at both connectors in good light: contacts should be clean and undamaged, and the sheath free of cuts. Read the EcoFlow manual to find out in which sequence the units should be connected and switched on, and keep the instructions close to the installation. If anything seems unclear, ask a professional rather than guessing.
Safety
This cable links devices that handle energy: use it only with equipment intended for it and within the limits of the manual. Do not modify it, do not use it if the sheath or a connector is damaged, and leave air around the units. As no protection rating is given, keep the connections away from moisture.
Care and storage
Wipe it with a dry cloth, check the connectors regularly and store it without tight bends, in a dry place at moderate temperature.
Why length matters
A 0.4 m cable leaves almost no slack. Before choosing it, place your two units in their final positions and check that their connectors are within reach of each other without pulling on the link.
