EN

SUNBEAMSystem

SUNBEAMsystem Maxa 109 W Black Flexible Solar Panel, Junction Box

  • Black flexible 109 W solar panel that blends into dark roofs.
  • Junction box output with two 0.7 m cables.
  • Monocrystalline Sunpower cells with a stated efficiency of 22.3%.
  • Electrical profile of 18.43 V and 5.92 A at maximum power.
€ 224.10incl. VAT

In stock

  • Free delivery — Delivery in 3 to 15 working days
  • Free returns within 30 days
  • Order without creating an account
  • Electrical connection: to be carried out by a qualified installer.

A question about this product? Contact an adviser

A black version for dark surfaces

This black variant of the SUNBEAMsystem Maxa keeps the 109 W rating and the junction box output of the standard version but aims for discretion. On an anthracite roof, a dark boat hatch or a black body panel, the module blends in instead of standing out. That is a matter of looks and nothing more: output depends on sunlight and orientation, not on colour.

Typical uses

A private owner could fit it on a van painted dark grey, on a small sailing boat or on the roof of a garden shed to keep a battery topped up. In a professional setting it can equip a black company vehicle or an isolated technical cabin, as long as the matching controller accepts the values below. The monocrystalline Sunpower cells are stated at 22.3% efficiency. Before buying cable or a controller, note the voltage and current figures listed further down, because they set the limits of what the rest of the circuit must handle.

Connecting through the box

Current leaves through a junction box with two 0.7 m cables (2 x 0.7 m). This layout leaves the routing up to you: you can shorten the path or extend the link with a solar cable whose cross-section is consistent with a current of 5.92 A.

Points to watch

  • Never let the two free cables touch while the module is exposed to light.
  • Keep the joint between the cables and any extension away from moisture.
  • No protection rating is supplied, so refer to the manufacturer’s instructions.

Fitting sequence

  1. Choose a spot without lasting shade, away from aerials and roof rails.
  2. Clean and dry the surface.
  3. Secure the panel following the manufacturer’s advice, since it has no mounting eyelets.
  4. Wire the module to a charge controller, itself connected to the battery.

For any link to a household installation, call on a qualified installer.

The essentials

Black finish, junction box, 109 W: this is a flexible module for a small stand-alone system, with an output you can adapt to your own cabling.

Technical specifications

  • Power: 109 W
  • Cell type: monocrystalline Sunpower (22.3% efficiency)
  • Open-circuit voltage (Voc): 21.70 V
  • Voltage at maximum power (Vmp): 18.43 V
  • Current at maximum power (Imp): 5.92 A
  • Short-circuit current (Isc): 6.29 A
  • Output type: Junction Box (2 x 0.7 m)
  • Mounting eyelets: no

Dimensions and weight are not included in the data supplied.

Safety, cleaning and off-season storage

A black surface readily heats up in the sun: avoid touching it after long exposure and do not leave objects on it. Make sure the controller tolerates 21.70 V open-circuit. A soft cloth and clear water are enough to remove dust and deposits. Out of season, keep the module flat, away from excessive heat and sharp objects.

BrandSUNBEAMSystem
Warranty2 years
Cell typeMonocrystalline Sunpower (22,3% efficiency)
Power109 W
Voc - Voltage open circuit21,70 V
Imp - Ampere maximum power5,92 A
Vmp - Voltage maximum power18,43 V
Isc - Ampere short circuit6,29 A
Type of outputJunction Box (2 x 0,7m)
With mounting eyeletsNo
BrandSUNBEAMSystem
SKU6005550123
ConditionNew

Delivery

  • Order processing within 1 to 2 working days, delivery in 3 to 15 working days.
  • Free from €150, otherwise €9.90.
  • Countries served: Belgium, France, the Netherlands, Germany, Luxembourg.
  • Large items: pallet delivery by appointment.

Returns

  • 14-day statutory withdrawal period, extended to 30 days by Santoro Energie.
  • Free return, collection arranged by us.
  • Item must be uninstalled and in its original packaging. Refund within 14 days of receiving and inspecting the return, for defective and non-defective items.
Support

Request a callback

Leave your number: an adviser will get back to you.

Your privacy choices