A mount designed around a single angle
Unlike adjustable versions, this one sets the tilt at 9 degrees. That choice simplifies fitting: there is nothing to adjust, so fewer moving parts and fewer chances of a mistake when tightening. The mount is meant for a solar panel placed on a balcony, almost flat, with a low silhouette.
Who is it suited to?
Someone whose facade already gets good exposure and who does not want to fiddle with settings. If you are unsure about orientation, a mount with variable tilt will give you more room to manoeuvre.
Example uses
- An apartment whose balcony faces the sun and which wants an unobtrusive module;
- a community space or small craft business with a utility balcony;
- a holiday home where you want something quick to put up and take down.
What is known about the build
The available data mention only a weight of 5 kg and the 9 degree angle. The material, dimensions and permitted loads are not given in the sheet, so refer to the manufacturer’s instructions before buying to check that your panel falls within the intended range.
Setting it up
- Measure the space on the balcony and decide where the module’s cable will run.
- Check the nature of the railing or floor and pick suitable hardware.
- Assemble the mount on the ground, without the panel, to check that it is square.
- Fit the panel, tighten, then test stability with a gentle push.
Linking to the home’s electrical network is a job for a qualified installer.
Before you decide
Ask yourself three questions: does my balcony get sun for a good part of the day, can my railing or floor carry this weight, and is my panel compatible with the structure? If you are unsure about any of them, it is worth asking an installer for advice or rereading the instructions before ordering. A quick sketch of the balcony, with the position of the panel and the cable route, often reveals problems early.
Strengths of this model
- 9 degree angle with nothing to adjust;
- only 5 kg, so easy to carry out to the balcony;
- a low profile that limits visual impact.
Specification sheet
- Type: solar panel mount for balconies;
- Tilt: 9 degrees;
- Weight: 5 kg.
Safety precautions
Even on a shallow slope, a large module is pushed by the wind. Do not exceed the limits given by the manufacturer, check tightness after the first few days of use and do not install anything if the mount does not seem stable enough. Keep walkways clear and do not let cables trail across the balcony floor.
Care and storage
A wipe with a damp cloth is generally enough. After a storm, check everything again. If you dismantle it, keep the screws in a small separate bag and store the frame away from moisture.
