A supply of electricity that travels with you
This 600 W Xtorm power station contains a 512 Wh LiFePO4 battery. In a single case it brings together AC power, DC power and USB ports, which can replace several chargers on a campervan trip, a day on the boat or during a mains outage. You charge it, carry it, then plug each device into the output that suits it.
It also offers Bluetooth + Wifi connectivity. Check the manufacturer’s manual to see which functions can be reached remotely.
Who can use it
At home and for leisure
A laptop charges from a USB-C PD 100W port, a smartphone from a USB-A port, and a small lamp or fan from the 12 V output. For a travel kettle or a camera charger, the two 230 V sockets are enough as long as the combined load stays under 600 W.
In the field
Photographers, tradespeople and event organisers will find a light power point for a modest tool, a speaker or extra lighting. Always check the rating plate of each device before connecting it.
The outputs in detail
- Mains sockets: 2 x AC 230V (EU Schuko), max. 600 W continuous load, max. 1000 W peak load.
- USB: 2 x USB-A 5V/2,4A and 2 x USB-C PD 100W.
- Direct current: 1 x 12V/10A.
Plan your use before leaving home: add up the wattage of the devices you intend to run together and compare the total with the 600 W continuous limit. Equipment with a motor or a heating element can draw more at start-up, so the 1000 W peak figure is a margin to keep in mind rather than a target. If the manual of an appliance gives a starting current, take it into account, and prefer low-consumption models when the battery has to last for an entire evening.
Recharging: mains or solar panel
From a household socket, recharging takes +/- 1.5 hours. The DC input accepts an input power of 600W via adapter; on the solar side, input power is 200W at 12V – 20V (max. 10A). Make sure your panel and its cable stay within this range before connecting them.
Technical specifications
- Battery type: LiFePO4
- Capacity: 512 Wh
- Dimensions: 301 x 227 x 193mm
- Weight: 7kg
- Outputs: USB, USB-C PD, 12 V, AC
- Connectivity: Bluetooth + Wifi
Using it safely
Place the station on a stable, dry surface with free space around the case so air can circulate. Do not cover it while charging or in use. Use only cables in good condition and suited to the current drawn, and never exceed the power limits listed above. As no water-protection rating is given here, keep it away from rain and splashes.
Care and storage
Wipe the case with a dry cloth and avoid abrasive products. If it will sit unused for several weeks, keep it in a mild, dry place with a partial charge and check the level from time to time. Follow the manufacturer’s manual for transport and disposal.
