The same footprint, built for three phases
This second-generation Anker SOLIX meter is the three-phase version of the series. It is intended for buildings whose supply is split across three phases: larger houses, workshops, small farm buildings or commercial premises. Like any meter of this kind, it generates no energy; it supplies measurements that a compatible system can rely on.
Typical scenarios
House with heavy loads
A charging point, a heat pump or an induction cooker is often wired across several phases. A three-phase meter gives an overview of these loads, which can help when thinking about how to distribute solar generation.
Workshop, farm or commercial premises
In a workshop with machinery, on a farm or in a shop, consumption is irregular. Having a continuous reading makes it easier to analyse peak hours before considering storage or an extension.
What the data allow us to state
The information supplied is limited to the Anker brand, the range name and the casing dimensions: 105 x 19 x 66.7 mm. Neither maximum current, voltage, accuracy nor communication method is mentioned. These must be read from the manual, as must the list of systems the device works with.
Steps before connecting
- Confirm that your installation really is three-phase, for example from your main breaker or your supply contract.
- List the appliances and the Anker SOLIX system to be paired, then check their compatibility in the official documentation.
- Find an accessible spot in the panel, bearing in mind the casing’s small 19 mm width.
- Commission a qualified electrician for the wiring of the three phases and for testing.
Why the split between phases matters
In a three-phase building the loads are not always balanced: one phase may be heavily used while another stays lightly loaded. Observing these differences helps you to understand how the installation really behaves and to discuss it with the electrician, without drawing hasty conclusions from a single day of readings or from one unusual week.
Technical specifications
- Brand: Anker
- Range: SOLIX, Gen 2 smart meter
- Network type: three-phase
- Dimensions: 105 x 19 x 66.7 mm
Other parameters are not supplied here; consult the manufacturer’s documentation.
Caution in a three-phase environment
A three-phase panel presents voltages between phases that are higher than those of a single-phase setup: all the more reason never to work without first switching off and verifying that no voltage is present. Use insulated tools, respect the cable cross-sections required and do not open the casing. If in doubt, stop and call a professional.
Care and storage
With the power off, a dry cloth is enough to remove dust. Keep the meter in its packaging until it is fitted, away from moisture, knocks and sudden temperature swings. After any change to the installation, check the connections again.
