A 5 m lead for alternating-current supply
This mains cable belongs to the Ecoflow STREAM range and measures 5 m. It acts as the AC-side link: its length gives latitude to position the device where it suits you, rather than where the socket dictates. The data does not specify the plug type or the devices served; the manufacturer’s manual settles this.
Where it helps
In a house or flat, it can link equipment in a utility room, a garage or a laundry room to a connection point a few metres away. On a professional site, it suits a workshop, an equipment store or a technical room where sockets are not always within reach.
Design and features
Only the length is known
The manufacturer states only the brand and the 5 m length here. Neither the voltage, the maximum current, the conductor cross-section nor the plug type is provided. Do not draw hasty conclusions from the length alone: a long cable can have different current limits from a short one.
Why length matters
The longer a cable, the more attention its routing and possible heating need. Always unroll it fully when it is in use.
Connection and set-up
- Make sure the device is switched off before plugging in.
- Unroll the cable completely to avoid heating of a coiled section.
- Avoid running the cable under a rug or through a doorway.
- Plug back in and check operation according to the manufacturer’s instructions.
Connection to a home electrical installation or to a distribution board must be entrusted to a qualified installer.
Strong points of this model
- 5 m length, useful for freeing the choice of location.
- STREAM range from the Ecoflow brand.
- A single cable, with no extra accessory to assemble.
Technical specifications
- Brand: Ecoflow
- Type: mains cable from the STREAM range
- Length: 5 m
Safety
Mains alternating current is dangerous: never touch live pins and do not use a cable whose sheath or plug is damaged. Respect the limits given by the device manufacturer, do not plug several powerful items into the same extension, and do not cover the cable (rug, blanket) so as to avoid overheating. No waterproofing rating is provided: keep the plugs dry.
Care and storage
Unplug by gripping the plug, never the cable. Wipe dry, store in wide loops in a dry, mild place, away from sharp edges and any heat source.
Checks before use
Inspect the plug and the sheath along the whole length, especially near the ends where stresses are highest. A lead that heats up, smells of burning or has play in the plug must be taken out of service.
Choosing the right length
Measure the real path of the cable, from the device to the socket, counting detours. If the route exceeds 5 m, look for another arrangement rather than joining several cables end to end, which multiplies weak points.
