EN
0 Call us+32 462 37 47 34

Installation accessories

This category gathers everything used to mount, connect, protect and carry a solar setup or a power station: balcony and flat-roof mounts, cables, connectors, adhesives, cable glands and bags. Browse the subcategories to narrow your search down to the task you need to complete.

Showing 13–24 of 134 results

Products

Anker

Anker Flat Roof Solar Panel Mount in Galvanized Steel, Pack of 2

  • Anker mount for installing solar panels on a flat roof, sold as a pack of 2.
  • Hot-dip galvanized steel, the material stated on the sheet.
  • Tilt support base of 61 × 470 × 2 mm and lower support base of 56 × 866.4 × 2 mm.
  • Two distinct parts that raise and steady the panel.
€ 98.10incl. VAT
Add to cart

Bluetti

Bluetti Short DC7909 to XT90 Adapter Lead, 8 cm Long

  • Very short adapter lead that converts a DC7909 connector to an XT90 connector.
  • Stated length: 8 cm, for a tidy link between two units placed side by side.
  • Stated dimensions: 8 cm.
  • Compact enough to slip into a bag or an accessory pouch.
€ 8.96incl. VAT
Add to cart

Bluetti

Bluetti Connection Adapter to XT90 Connector

  • Bluetti adapter that provides the transition to an XT90-type connector.
  • Useful for linking Bluetti equipment to an accessory fitted with that plug.
  • Installation accessory to check against the instructions before any connection.
€ 107.10incl. VAT
Add to cart

Bluetti

Bluetti Aviation Plug M28 to P090D Cable for Power Stations

  • Cable joining an aviation-type M28 connector to a P090D-type connector.
  • For pairing two Bluetti items whose sockets belong to these two families.
  • A simple accessory with no electronics or settings.
  • Voltage, current and length are not provided; see the devices' manuals.
€ 107.10incl. VAT
Add to cart

Bluetti

Bluetti Adapter Cable: Locking Terminal to XT60 Connector

  • Links a locking terminal to a device fitted with an XT60 connector.
  • The locking terminal helps keep the connection from coming apart under a light pull.
  • A Bluetti accessory, to be paired with equipment whose compatibility is confirmed in the manual.
  • Compact cable that is easy to keep in a bag or a storage box.
€ 89.10incl. VAT
Add to cart

Bluetti

Bluetti Locking Terminal to P090D Adapter Cable

  • Adapter cable between a locking terminal and a P090D-type connector.
  • Suited to set-ups where a locked connection is preferable to a plain plug.
  • A passive accessory with no electronics or configuration.
  • Electrical values and length are not specified; see the devices' manuals.
€ 80.10incl. VAT
Add to cart

Bluetti

Bluetti P120D to XT60 Adapter Cable for Power Stations

  • Adapter cable between a P120D-type port and an XT60-type plug.
  • Handy for plugging equipment fitted with an XT60 connector into a Bluetti station.
  • No built-in electronics: just a cable to plug in.
  • Electrical values and length are not stated, so follow the devices' manuals.
€ 26.96incl. VAT
Add to cart

Bluetti

Bluetti P150D to P090D Interconnection Cable for Compatible Units

  • Interconnection cable with a P150D-type end and a P090D-type end.
  • Meant for pairing two Bluetti devices whose ports carry these two designations.
  • No electronics inside the accessory: it simply plugs in between the two ports.
  • Electrical values are not stated, so each device's manual is the reference.
€ 107.10incl. VAT
Add to cart

Bluetti

Bluetti 12/24 V Car Charging Cable for EP500 Pro, 50 cm

  • Bluetti vehicle charging cable for the EP500 Pro, intended for a 12/24 V vehicle socket.
  • 50 cm long: a short format that is easy to stow in a boot or glove box.
  • Lets you recharge the power station from a vehicle when mains power is unavailable.
€ 26.96incl. VAT
Add to cart

Bluetti

Bluetti P090D to DC7909 Link Cable for Power Stations

  • Link cable between a P090D-type socket and a DC7909-type connector.
  • Designed to join a Bluetti power station to equipment that uses a different plug.
  • A simple accessory with no electronics to set up.
  • Voltage and current are not specified, so check the manuals of the devices you connect.
€ 80.10incl. VAT
Add to cart

Bluetti

Bluetti Connection Cable for External Expansion Battery

  • Cable meant to link a Bluetti external battery to the compatible main unit.
  • Opens the way to longer running time, within the limits set out in the manuals.
  • A passive accessory: no software, no settings.
  • Electrical details and length are not specified, so consult the manufacturer's documentation.
€ 71.10incl. VAT
Add to cart
Support

Request a callback

Leave your number: an adviser will get back to you.

Your privacy choices