EN
0

Electrical distribution and protection

This category brings together six accessories that organise and protect a standalone setup: Bluetti DC distribution hubs, an Anker SOLIX output switch, a residual-current device with cable and a SUNBEAMsystem bypass diode for solar panels.

Showing all 6 results

Products

Anker

Anker SOLIX Solarbank E1600 Output Switch, 1000 x 90 x 45 mm

  • Output switch designed to accompany the Anker SOLIX Solarbank E1600.
  • Elongated format of 1000 × 90 × 45 mm, to keep in mind when choosing where it goes.
  • Weighs 400 g, so it adds little load to its support or fixing.
  • Have a qualified installer handle the wiring whenever the household network is involved.
€ 35.10incl. VAT
Add to cart

Bluetti

Bluetti DC Hub for Charger 2, DC Distribution Hub

  • Bluetti DC hub designed to accompany the brand's Charger 2.
  • Brings direct-current distribution together in one place in the installation.
  • Useful in a converted vehicle, boat or mobile workshop fitted with Bluetti equipment.
  • Electrical values and compatibility should be checked in the manufacturer's manual.
€ 224.10incl. VAT
Add to cart

Bluetti

Bluetti Hub A1 Parallel Box for Combining Power Units, 3.5 kg

  • Parallel box from Bluetti, intended to link several elements of an energy installation.
  • Weighs 3.5 kg: easy to carry, yet steady once set down.
  • Useful for centralising the connections of a converted vehicle, a workshop or a shed.
  • Read the manual to learn which models are compatible before buying cables.
€ 494.10incl. VAT
Add to cart

Bluetti

Bluetti Hub D1 DC Power Hub, Compact 250 x 160 x 73 mm Unit

  • DC power hub for gathering several elements of a Bluetti setup in one place.
  • Housing of 250 mm × 160 mm × 73 mm, easy to fit in a cabinet or on a shelf.
  • Weighs 1.9 kg, light enough for mobile builds or converted vehicles.
  • Check compatibility in the manufacturer's manual before connecting anything.
€ 269.10incl. VAT
Add to cart

CEE Residual Current Device (RCD) with 1 m Cable Length

  • Residual current device (RCD) in CEE format, placed between an energy source and the equipment it feeds.
  • Length of 1 m, so the module can sit away from the socket or generator.
  • Handy on a worksite, at an event or with a generator where personal protection matters.
  • Current rating and sensitivity are not stated here: check the manufacturer's data sheet.
€ 40.46incl. VAT
Add to cart

SUNBEAMSystem

SUNBEAMsystem Flush By-pass Diode for Indoor Solar Panels, 6 cm

  • SUNBEAMsystem by-pass diode intended for solar panels used indoors.
  • A tiny component: 6 cm long and only 2 g.
  • Helps limit the effect of a shaded zone on a panel, depending on the module design.
  • Selection and fitting to be confirmed against the documentation of the panel concerned.
€ 5.31incl. VAT
Add to cart

Distributing and protecting your power

These parts neither generate nor store electricity: they share current between your devices and limit risks when a fault occurs. A DC hub combines several sources, a parallel box links units together, a residual-current device cuts the circuit on a leakage, and a bypass diode protects a partly shaded solar panel.

The key is to choose an accessory designed for your equipment. Read the product page to see which power stations or batteries it connects to, and do not mix brands unless compatibility is clearly stated. Items in this category range from a few euros for a diode to several hundred for a hub, because these parts do not serve the same function. Compare the intended use before the price. If you are unsure about a connection, have the setup checked by a professional before switching anything on.

  • Exact model of your power station or battery
  • Type of current: direct or alternating
  • Length and type of the supplied cable or connector
  • Whether an electrician is needed for the connection
Support

Request a callback

Leave your number: an adviser will get back to you.

Your privacy choices